Cuplock System
|
| Code |
Length(m) |
Weight(kg) |
| NTS-CV05 |
0.5 |
3.53 |
| NTS-CV10 |
1.0 |
6.31 |
| NTS-CV13 |
1.3 |
8.28 |
| NTS-CV15 |
1.5 |
9.05 |
| NTS-CV18 |
1.8 |
11.05 |
| NTS-CV20 |
2.0 |
11.82 |
| NTS-CV23 |
2.3 |
13.8 |
| NTS-CV25 |
2.5 |
14.57 |
| NTS-CV28 |
2.8 |
16.58 |
| NTS-CV30 |
3.0 |
17.34 |
|
Standards(Vertical)
Hot Dip Galv., 48.3 x 3.2mm with spigot
Lower fixed cups at 500mm intervals
Top cups allow 4 components
Spigot 150mm long with locking pin for vertical connection
|
|
| Code |
Length(m) |
Weight(kg) |
| NTS-CH06 |
0.6 M |
2.54 |
| NTS-CH09 |
0.9 M |
3.65 |
| NTS-CH10 |
1.0 M |
3.92 |
| NTS-CH12 |
1.2 M |
4.59 |
| NTS-CH125 |
1.25 M |
4.96 |
| NTS-CH13 |
1.3 M |
5.14 |
| NTS-CH15 |
1.5 M |
5.88 |
| NTS-CH16 |
1.6 M |
6.25 |
| NTS-CH18 |
1.8 M |
6.99 |
| NTS-CH20 |
2.0 M |
7.74 |
| NTS-CH25 |
2.5 M |
9.60 |
|
Ledger (Horizontal)
Hot Dip Galv., 48.3 x 3.0mm Steel Tube Locate in bottom cup of standard Forged Blade ends for strength
|
|
Swivel Face Brace
Has a swivel blade at each end
|
| Code |
Bay Size(m) |
Brace Length(m) |
Weight(kg) |
| WCB1 |
1.8 x 1.5 |
2.40 |
8.70 |
| WCB2 |
1.8 x 2.0 |
2.70 |
9.80 |
| WCB3 |
2.5 x 1.5 |
3.00 |
10.70 |
| WCB4 |
2.5 x 2.0 |
3.30 |
11.50 |
| WCB5 |
3.0 x 2 .0 |
3.20 |
13.00 |
|
Intermediate Transom
Hot Dip Galv., 48.3 x 3.0mm Steel Tube
Spans between ledgers
Mid bay support for 38mm timber boards
Integral locking device to prevent horizontal movement
Turned down jaw at ends to prevent vertical movement |
| Code |
Length(m) |
Weight(kg) |
| NTS-CIT0565 |
0.565 |
3.83 |
| NTS-CIT0795 |
0.795 |
4.67 |
| NTS-CIT13 |
1.3 |
6.48 |
| NTS-CIT18 |
1.8 |
8.29 |
|
|
|
|
| Code |
Description |
Weight(kg) |
| NTS-CIBT1 |
5 Board Intermediate Transom Plus 1 Inside Board |
7.5 |
| NTS-CIBT2 |
5 Board Intermediate Transom Plus 2 Inside Board |
8.5 |
| NTS-CIBT3 |
5 Board Intermediate Transom Plus 3 Inside Board |
9.3 |
|
Inside Board Transom
Hot Dip Galv., 48.3 x 3.0mm Steel Tube
Extends beyond ledger providing support to board
Secure fit over ledger
Locking device to prevent movement |
|
Hop Up Bracket
Hot Dip Galvanized finish, locates at cup joint
Increase width of working platform
Handrail post fixing if required
| Code |
Length(m) |
Weight(kg) |
| NTS-CHUB1 |
0.291 |
1.50 |
| NTS-CHUB2 |
0.565 |
6.59 |
| NTS-CHUB3 |
0.795 |
7.88 |
|
| Code |
Length(m) |
Weight(kg) |
| NTS-COT13 |
1.3 |
8.01 |
| NTS-COT18 |
1.8 |
11.05 |
| NTS-COT08 |
0.8 |
4.97 |
|
Omega Transom
Hot Dip Galvanized finish,provides very strong supporting platform.
Locates in lower cup joint of vertical
Used in mobile towers and access platform
|
|
Omega Return Transom
A transom with a hooked profile which locates over the ledger,of the adjacent scaffold run to secure the corner
|
| Code |
Length(m) |
Weight(kg) |
| NTS-CORT |
1.3 |
8.6 |
|
Omega Single Board Support
Positioned at cup joint
Support for 1 board
| Code |
Length(m) |
Weight(kg) |
| NTS-COSBS |
0.267 |
2.3 |
|
Omega Hop Up Bracket
Increase width of platform by 2 or 3 battens
Option of handrail post
| Code |
Overall Length(m) |
Weight(kg) |
| NTS-COHUB2 |
0.595 |
6.6 |
| NTS-COHUB3 |
0.815 |
7.6 |
|
Steel Ladder
Hot Dip Gal. , 48.3*3.2mm Steel Tube
| Code |
Length |
Weight(kg) |
| NTS-CSL3 |
3' |
0.91 |
5.15 |
| NTS-CSL5 |
5' |
1.52 |
8.18 |
| NTS-CSL10 |
10' |
3.05 |
16.10 |
|
 |
Return Device |
Staircase |
single Board Support |
|
 |
Code:Nts-CCA
Description:Caster Adapter
Surface:HDG |
Forged Top Cup
0.48kg |
Pressed Bottom Cup
0.27kg |
Forged Ledger Blade
0.25kg |
|
