Kwikstage System
|
Standards(Vertical)
Made from 48.3*4.0mm Steel Tube
"V"pressings in clusters at 495mm intervals to provide connection points for the Ledgers & Transoms
Spigot at head
| Code |
Length(m) |
Weight(kg) |
| NTS-KSV05 |
0.5 |
3.0 |
| NTS-KSV10 |
1.0 |
6.2 |
| NTS-KSV15 |
1.5 |
8.5 |
| NTS-KSV20 |
2.0 |
11.7 |
| NTS-KSV25 |
2.5 |
14.4 |
| NTS-KSV30 |
3.0 |
17.2 |
|
|
|
Ledger(Horizontal)
Made from 48.3*3.2/3.25mm steel tubes with a Wedge fixing device at each end that fits into upper "V" pressings
Ledgers are painted with a 3 step finish, shot blast, undercoat and Top Coat.
|
| Code |
Length |
Weight(kg) |
| NTS-KSH12 |
1.2 m |
4'2" |
5.6 |
| NTS-KSH18 |
1.8 m |
6' |
7.0 |
| NTS-KSH24 |
2.4 m |
8' |
9.2 |
|
|
Transoms
Material: 50 x 50 Angle Bar
Inverted T section with wedge fixing device at each end
Fit into lower 'V' pressing on Standards
Flanges provide seating for decking components
| Code |
Length(m) |
Weight(kg) |
| NTS-KST06 |
0.6 |
3.3 |
| NTS-KST08 |
0.8 |
5.9 |
| NTS-KST12 |
1.2 |
9.7 |
| NTS-KST18 |
1.8 |
13.1 |
|
Return Transoms
Pressed steel section that hooks over
ledger to form 90 degree return in scaffold
| Code |
Length(m) |
Weight(kg) |
| NTS-KSRT08 |
0.8 |
8.5 |
| NTS-KSRT12 |
1.2 |
13.1 |
|
| Code |
Length |
Weight(kg) |
| NTS-KSB183 |
1.83m |
6' |
6.8 |
| NTS-KSB275 |
2.75 m |
9' |
10.5 |
| NTS-KSB353 |
3.53 m |
11'6" |
12.4 |
| NTS-KSB366 |
3.66 m |
12' |
12.9 |
|
Diagonal Braces
Made from 48.3*2.5mm Painted steel tubes
Tube with pivoted wedge devices at each end
Fit into outside 'V' pressings on the Standard |
|
Platform Bracket(Board Stage Bracket)
Increase width of working platform forming cantilevered arrangement
Inverted T section wedge fixing device at one end fits into 'V' pressing
on standard Always use tie bars
| Code |
Width of Board(mm) |
Weight(kg) |
| NTS-KSBB1 |
230 |
2.60 |
| NTS-KSBB2 |
460 |
6.60 |
| NTS-KSBB3 |
690 |
9.54 |
|
Steel Stage
57mm thick x 238mm width
Non Skid Surface Dimpled Finished;
| Code |
Length |
Weight(kg) |
| NTS-KSD076 |
0.76 m |
2'6" |
6.2 |
| NTS-KSD120 |
1.2 m |
4'2" |
9.1 |
| NTS-KSD180 |
1.8 m |
6' |
13.6 |
| NTS-KSD240 |
2.4 m |
8' |
17.1 |
|
Tie Bars
Made from steel angle, they secure the decking on the Stage Brackets, avoiding spreading
Curved lugs at each end are located in holes in the 2 & 3 Board Brackets
| Code |
Length |
Weight(kg) |
| NTS-KTB12 |
1.2 m |
4'2" |
3.8 |
| NTS-KTB18 |
1.8 m |
6' |
5.4 |
| NTS-KTB24 |
2.4 m |
8' |
7.2 |
|
Ladder Access Transom
Used to form opening in platform.
| Code |
Length |
Weight(kg) |
| NTS-KLAT |
1.2 M |
4'2" |
10.0 |
|
|
| Code: |
NTS-KSTBB |
| Description: |
Toe Board Bracket
Clamps onto standard by means of captive wedge
Holds one or two toeboards in position
|
| Weight: |
0.8 kg |
|
| Code: |
NTS-KSETBB |
| Description: |
End Toe Board Bracket
Fit into 'V' pressings on standards at end of platform
Holds end toeboard into position
|
| Weight: |
1.3 kg |
|
|
|
| Code: |
NTS-KSICF |
| Description: |
Internal Corner Frame Used with 2 and 3 board stage brackets at internal corners of buildings |
| Weight: |
13.7 kg |
|
| Code: |
NTS-KSLBT |
| Description: |
Loading Bay Transom
The Transom Wedges connect to 2 'V' pressings on standard
The top chordis an inverted "T" section into position, providing seating for the decking
|
| Weight: |
33 kg |
|
|
